Sunroof / Moonroof Motor: Testing and Inspection

SUNROOF MOTOR INSPECTION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. A-pillar trim A-Pillar Trim Removal/Installation

b. Front scuff plate inner Front Scuff Plate Removal/Installation

c. Rear scuff plate inner Rear Scuff Plate Removal/Installation

d. Front seat belt lower anchor installation bolt (driver-side) Front Seat Belt Removal/Installation

e. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

f. Front seat belt upper anchor installation bolt Front Seat Belt Removal/Installation

g. B-pillar upper trim B-Pillar Upper Trim Removal/Installation

h. Trunk box

i. Seat side box Seat Side Box Removal/Installation

j. Trunk end trim Service and Repair

k. Third-row seat Rear - Third-Row Seat Removal/Installation

l. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

m. Trunk side trim

n. Roof side trim Roof Side Trim Removal/Installation

o. Second-row seat belt upper anchor installation bolt Second-Row Seat Belt Removal/Installation

p. C-pillar trim C-Pillar Trim Removal/Installation

q. Third-row seat belt upper anchor installation bolt Third-Row Seat Belt Removal/Installation

r. D-pillar trim D-Pillar Trim Removal/Installation

s. Front map light Front Map Light Removal/Installation

t. Sunvisor Service and Repair

u. Assist handle Service and Repair

v. RES unit cover (Vehicles with RES) RES Unit Removal/Installation

w. Sunroof seaming welt.

x. Headliner. Service and Repair

y. Sunroof motor Service and Repair

3. Measure the voltage at each terminal.

- If not as specified, inspect the parts listed under "Inspection item" and the related wiring harnesses.

- If the parts and wiring harnesses are normal but the system still does not work properly, replace the sunroof motor. Service and Repair

Terminal Voltage Table (Reference)