Third-Row Seat Belt Removal/Installation

THIRD-ROW SEAT BELT REMOVAL/INSTALLATION

CAUTION:
- The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.

1. Remove the following parts:
a. Trunk box

b. Seat side box Seat Side Box Removal/Installation

c. Trunk end trim Service and Repair

d. Third-row seat Rear - Third-Row Seat Removal/Installation

2. Remove the bolt A.






3. Remove the rear scuff plate inner. Rear Scuff Plate Removal/Installation

4. Remove the trunk side trim.

5. Remove the cover.

6. Remove the bolt B.

7. Remove the third-row seat belt.

8. Install in the reverse order of removal.