Sunroof / Moonroof Motor: Service and Repair

SUNROOF MOTOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. A-pillar trim A-Pillar Trim Removal/Installation

b. Front scuff plate inner Front Scuff Plate Removal/Installation

c. Rear scuff plate inner Rear Scuff Plate Removal/Installation

d. Front seat belt lower anchor installation bolt (Driver side) Front Seat Belt Removal/Installation

e. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

f. Front seat belt upper anchor installation bolt Front Seat Belt Removal/Installation

g. B-pillar upper trim B-Pillar Upper Trim Removal/Installation

h. Trunk box

i. Seat side box Seat Side Box Removal/Installation

j. Trunk end trim Service and Repair

k. Third-row seat Rear - Third-Row Seat Removal/Installation

l. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

m. Trunk side trim

n. Roof side trim Roof Side Trim Removal/Installation

o. Second-row seat belt upper anchor installation bolt Second-Row Seat Belt Removal/Installation

p. C-pillar trim C-Pillar Trim Removal/Installation

q. Third-row seat belt upper anchor installation bolt Third-Row Seat Belt Removal/Installation

r. D-pillar trim D-Pillar Trim Removal/Installation

s. Front map light Front Map Light Removal/Installation

t. Sunvisor Service and Repair

u. Assist handle Service and Repair

v. RES unit cover (Vehicles with RES) RES Unit Removal/Installation

3. Remove the sunroof seaming welt.

4. Remove the headliner. Service and Repair

5. Disconnect the sunroof motor connector.






6. Remove the screws, and then remove the sunroof motor.

7. Install in the reverse order of removal.

NOTE:
- If the glass panel or the sunroof motor is moved with the sunroof motor removed, initial position setting of the sunroof motor will be required. Perform initial position setting referring to the Sunroof Motor Assembly Note. Overhaul