Second-Row Seat Belt Removal/Installation

SECOND-ROW SEAT BELT REMOVAL/INSTALLATION

CAUTION:
- The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.

1. Turn the ignition switch to the LOCK position.

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Trunk box

b. Seat side box Seat Side Box Removal/Installation

c. Trunk end trim Service and Repair

d. Third-row seat Rear - Third-Row Seat Removal/Installation

e. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

f. Rear scuff plate inner Rear Scuff Plate Removal/Installation

g. Trunk side trim

4. Remove the cover.






5. Remove the bolt.

6. Remove the second-row seat belt.

7. Install in the reverse order of removal.