TRAC OFF Indicator Light does not Come ON

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: TRAC OFF Indicator Light does not Come ON
- TRAC OFF Indicator Light does not Come ON

DESCRIPTION

Refer to TRAC OFF Indicator Light Remains ON TRAC OFF Indicator Light Remains ON

WIRING DIAGRAM

Refer to TRAC OFF Indicator Light Remains ON TRAC OFF Indicator Light Remains ON

INSPECTION PROCEDURE

NOTICE:
When replacing the master cylinder solenoid, perform calibration Programming and Relearning.

PROCEDURE

1. CHECK CAN COMMUNICATION LINE ABS Warning Light Remains ON

NG -- GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) How to Proceed With Troubleshooting
OK -- Continue to next step.

2. INSPECT VSC OFF SWITCH TRAC OFF Indicator Light Remains ON

NG -- REPLACE VSC OFF SWITCH Removal
OK -- Continue to next step.

3. CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - VSC OFF SWITCH) TRAC OFF Indicator Light Remains ON

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

4. READ VALUE USING TECHSTREAM (TRAC/VSC OFF MODE) TRAC OFF Indicator Light Remains ON

NG -- REPLACE MASTER CYLINDER SOLENOID Disassembly

OK -- GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) How To Proceed With Troubleshooting