Curiosii for ever!: Car repair manuals for everyone.
Home >> Audi >> 2009 >> A6 Sedan (4F2) V6-3.2L (BKH) >> Repair and Diagnosis >> Transmission and Drivetrain >> Continuously Variable Transmission/Transaxle >> Shift Linkage >> Shift Cable >> Adjustments >> Selector Lever Cable, Adjusting

Selector Lever Cable, Adjusting






Selector Lever Cable, Adjusting

Special tools, testers and auxiliary items required

• Vehicle Diagnosis, Testing and Information System (VAS 5051B)

• Socket and key (T40031)

Procedure

- Unclip mounting frame for selector lever boot - 1 - from center console and lift it upward and off - arrows -.





- Place selector lever in position "D".

- Through opening - arrow - in shift mechanism, loosen bolt on selector lever cable approximately one turn using Socket (T40031).





• Loosen the clamping bolt approximately one turn. Do not remove it.

• Clamping bolt is only accessible in selector lever position "D".

• Selector lever must remain in position "D" while clamping bolt is loose.

- Carefully move selector lever lightly toward front and rear without shifting into another selector lever position, this releases the tension on the selector lever cable.

- Check exact position of selector lever in position "D" by pushing selector lever lightly towards driver's seat.

• Do not touch selector lever during the adjustment.

- Without touching selector lever, tighten clamping bolt in this position using socket and key (T40031), tightening torque => [ Selector Lever Cable Assembly Overview ] Description and Operation.

- Check shift mechanism => [ Selector Mechanism, Checking ] 01J Continuously Variable Transmission.

• Using the Vehicle Diagnosis, Testing and Information System (VAS 5051B) it is possible to compare the position of the Multi-Function Transmission Range (TR) Switch (F125) with the position on the selector lever.

• Vehicle Diagnosis, Testing and Information System (VAS 5051B) connected, "OBD", Vehicle System "02 - Transmission Electronics", Function "Measured Values, Display Group 2" selected.





- Compare display in field - 1 - to the position on the selector lever.

If shift mechanism does not function properly after adjusting selector lever cable:

- Bring selector lever cable into basic setting => [ Selector Lever Cable, Bringing into Basic Setting ] Selector Lever Cable, Bringing into Basic Setting.
pro multis · Curiosii