Shift Cable: Description and Operation

Selector Lever Cable Assembly Overview





1 Bolt

• 9 Nm

2 Selector shaft lever

• On certain versions with balance weight

3 Selector lever cable

• Do not bend or kink

• => [ Selector Lever Cable ] Service and Repair

• In case of damaged rubber boot, selector lever cable must be replaced

• Lightly lubricate ball socket with polycarbamide grease (G 052 142 A2) before installing.

• When installing, make sure rubber sleeve on transmission side is not twisted

• => [ Selector Lever Cable, Adjusting ] Selector Lever Cable, Adjusting

4 Nut

• 13 Nm, quantity 2

• Securely mounted on the selector lever cable

• Selector lever cable is secured to the support bracket

5 Bolt

• 13 Nm

• For selector lever cable adjustment

6 O-Ring

• Always replace

7 Retaining clip

• Selector lever cable to shift mechanism function unit

8 Bolt

• 23 Nm

9 Bracket for selector lever cable

10 Bolt

• 23 Nm

11 Selector lever cable console