Evaporative Emission Component Overview

Evaporative Emission Component Overview






1 Hose Bracket

2 Ventilation Line

• To remove and install, remove the rear bumper

3 Air Filter Housing

• For the Leak Detection Pump (LDP) (V144)

4 Nut

• 6 Nm

5 Bracket

• For the LDP.

6 Bolt

• 3 Nm

7 Mounting Plate

8 Rubber Bushing

9 Bolt

• 8 Nm

10 Leak Detection Pump (LDP) (V144)

• Installed location: behind the right rear wheel

• Removing and installing, refer to => [ Leak Detection Pump ] Service and Repair.

• Checking the fuel system for leaks, refer to => [ Fuel System, Checking for Leaks ] Fuel System, Checking for Leaks.

11 Hose Clamp

12 Connecting Hose

13 Vent Line

• Behind the wheel housing liner

14 Fuel Tank

15 Vent Line

• To the Evaporative Emission (EVAP) canister purge regulator valve 1 (N80).

• Push in the securing ring to pull off.

16 Vent Line

• On the underbody

17 Evaporative Emission (EVAP) Canister

• Installed location: under the spare tire wheel well.

• Removing and installing, refer to => [ Evaporative Emission Canister ] Service and Repair.

18 Connecting Line

• EVAP canister to LDP.

19 Vacuum Line

• To the intake manifold

20 Bolt

• 2 Nm