Ribbed Belt Pulley, Zexel

Ribbed Belt Pulley, Zexel





1 A/C Compressor

• Zexel

• Clean the flange before mounting the ribbed belt pulley.

2 Ribbed belt pulley

• Removing

• To loosen and tighten bolt, hold ribbed belt pulley firmly in place using a standard band wrench (with webbing).

3 Circlip

• Replace

• Install on the proper side, the side with beveled insertion edge faces away from A/C compressor (install flat side facing compressor).

4 Overload protection

• Bolted with to the ribbed belt pulley

• Keeps the ribbed belt pulley from turning when the A/C compressor gets blocked.

• To loosen and tighten bolts, hold ribbed belt pulley firmly in place using a standard band wrench (with webbing).

5 Hexagon bolt

• Replace

• To loosen and tighten bolt, hold ribbed belt pulley firmly in place using a standard band wrench (with webbing).

• Clean the thread on the A/C compressor shaft of old locking compound before installing.

• Install the bolt with locking compound (D 000 600 A2).

• 20 Nm

6 Hex socket head bolt

• Quantity: 3

• 5 Nm

Remove the ribbed belt pulley

• It is not necessary to remove the A/C compressor when replacing the ribbed belt pulley.

• To loosen and tighten bolts, hold ribbed belt pulley firmly in place using a standard band wrench (with webbing).

- Remove the ribbed belt.

- Remove bolts - arrows -.





- Remove bolt - 1 -.

- Remove the circlip - 1 -.





- Remove the ribbed belt pulley - 2 - from the A/C compressor.

Installing

Installation is performed in the reverse order; when doing this note the following:

• Clean the thread on the A/C compressor shaft of old locking compound before installing

• Clean the A/C compressor flange before mounting the ribbed belt pulley.

• Install the circlip on the proper side, the side with beveled insertion edge faces away from A/C compressor (install flat side facing compressor).

• Replace the hex bolt - 5 -. Refer to => [ Ribbed Belt Pulley, Zexel ] Ribbed Belt Pulley, Zexel.