Removal

2GR-FE STARTING: STARTER: REMOVAL

1. PRECAUTION

NOTICE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Service Precautions.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

5. REMOVE INLET NO. 2 AIR CLEANER Removal

6. REMOVE BATTERY Removal

7. REMOVE INLET NO. 1 AIR CLEANER Removal

8. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

9. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

10. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

11. REMOVE STARTER ASSEMBLY

(a) Disconnect the starter connector.





(b) Remove the terminal cap.

(c) Remove the nut and disconnect the starter wire.

(d) Remove the 2 bolts and starter.