Removal

2GR-FE ENGINE CONTROL: THROTTLE BODY: REMOVAL

1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

2. REMOVE ENGINE UNDER COVER RH

3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

4. REMOVE ENGINE UNDER COVER LH

5. DRAIN ENGINE COOLANT Service and Repair

6. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

(a) Disconnect the mass air flow meter connector and wire harness clamp.





(b) Disconnect the 3 hoses.





(c) Separate the ventilation hose.

(d) Loosen the hose clamp and separate the air cleaner cap sub-assembly from the throttle with motor body assembly.





(e) Release the 2 clamps and remove the air cleaner cap with hose.

8. REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY

(a) Disconnect the 2 water by-pass hoses from the throttle with motor body assembly.





(b) Disconnect the throttle body connector and wire harness clamp.





(c) Remove the 4 bolts, throttle with motor body assembly and wire harness clamp stay.

(d) Remove the gasket from the intake air surge tank assembly.