Windshield Washer Spray Nozzle: Adjustments

WIPER / WASHER: WASHER NOZZLE: ADJUSTMENT

1. REMOVE WASHER NOZZLE SUB-ASSEMBLY Removal

2. ADJUST WASHER NOZZLE SUB-ASSEMBLY

PRECAUTION OF WASHER NOZZLE ADJUSTMENT

(a) Do not clean or adjust the washer nozzle with a safety pin, etc. because;

(1) the washer nozzle tip is made of resin and could be damaged.

(2) adjustment is not necessary because the washer nozzle is a spray type. If it is necessary to change the nozzle angle, replace the washer nozzle with one that has a different nozzle angle. Adjustments

(b) If the washer nozzle is clogged with wax, etc., remove it and clean the nozzle hole with a soft resin brush, etc.

(a) Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.





Text in Illustration





3. INSTALL WASHER NOZZLE SUB-ASSEMBLY Installation