Front Coolant Pipe

Front Coolant Pipe

Special tools, testers and auxiliary items required

• Drip Tray for Workshop Crane (VAS 6208)

Removing

- Drain coolant. Refer to => [ Cooling System, Draining and Filling ] Procedures.

- Remove bolts - arrows -.





- Remove coolant pipes to ATF cooler from lock carrier.

• Ignore items - 1 to 4 -.

- Place Drip Tray for Workshop Crane (VAS 6208) under engine.





- Remove bolts - arrows -.

- Remove front coolant pipe from engine and from coolant pump.

Installing

• Tightening specifications. Refer to => [ Coolant Pipes Assembly Overview ] Coolant Pipes Assembly Overview.

Installation is in reverse order of removal, note the following:

• Replace O-rings.

- Fill with coolant => [ Filling ] Procedures.