Coolant Pipes Assembly Overview

Coolant Pipes Assembly Overview





1 Front coolant line

• Removing and installing, refer to => [ Front Coolant Pipe ] Front Coolant Pipe

2 Bolt

• Replace

• 8 Nm plus an additional 90° (1/4) turn.

3 O-ring

• Replace

4 Bolt

• 9 Nm

5 Right coolant line

• Removing and installing, refer to => [ Right Coolant Pipe ] Right Coolant Pipe

6 Coolant hose

7 O-ring

• Replace

8 Engine Coolant Temperature (ECT) Sensor (G62)

• Removing and installing, refer to => [ Engine Coolant Temperature Sensor ] Service and Repair

9 O-ring

• Replace

10 Retaining clip

11 Bolt

• 9 Nm

12 Rear coolant pipe

• Removing and installing, refer to => [ Rear Coolant Pipe ] Rear Coolant Pipe

13 Bolt

• 9 Nm

14 Bolt

• 9 Nm

15 O-ring

• Replace

16 Coolant hose

17 Bolt

• 9 Nm

18 Bolt

• Tightening specifications, refer to => [ Engine, Installing ] Engine, Installing

19 Left coolant line

• Removing and installing, refer to => [ Left Coolant Pipe ] Left Coolant Pipe

20 Lower left coolant pipe

• Removing and installing, refer to => [ Lower Left Coolant Pipe ] Lower Left Coolant Pipe

21 Bolt

• 9 Nm

22 Bolt

23 O-ring

• Replace

24 Bolt

• Replace

• 8 Nm plus an additional 90° (1/4) turn.

25 Seal

• Replace

26 Drain plug

• 10 Nm

Left heat shield - A and B -





Nuts - 1, 3, 4, 5 -

• 2.5 Nm

Nut - 2 -

• 4.5 Nm

Right heat shield - A and B -





Nuts - 1 and 3 -

• 4.5 Nm

Nuts - 2 and 4 -

• 2.5 Nm

Left driveshaft heat shield





Bolts - arrows -

• 23 Nm

Right driveshaft heat shield





Bolts - arrows -

• 23 Nm