Manufacturer Code Charts: 2607

DTC Troubleshooting: 2607

DTC 2607:

XM Diag

Canada Models

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when a problem (open or short) is detected in the GA-Net BUS.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How To Troubleshoot The Navigation System.

1. Clear the hard error code How To Troubleshoot The Navigation System.

2. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or press the engine start/stop button to select the ON mode.

3. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode Navigation System Diagnostic Mode Part One.

4. Check the System Links Navigation System Diagnostic Mode Part One.

Is the XM icon red?

YES -

Go to XM radio display is blank and no station information is displayed (Canada models with navigation system) troubleshooting Canada Models With Navigation System.�

NO -

Intermittent failure, the system is OK at this time.�