Leak Detection Pump: Service and Repair

Leak Detection Pump

Removing

- Disconnect the vacuum line - 1 - and ventilation lines - 2 and 3 -.






- Remove the nuts - arrows -.

- Remove the Leak Detection Pump (LDP) with bracket and disconnect the electrical connector.

Installing

Installation is performed in the reverse order of removal, noting the following:

• Before installing the LDP with bracket, connect the electrical connector.

• Vent line - 2 - must engage audibly.

Tightening specifications, refer to => [ Evaporative Emission Component Overview ] Evaporative Emission Component Overview.