Removal

2GR-FE CHARGING: GENERATOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT WHEEL RH

3. REMOVE FRONT FENDER APRON SEAL RH

4. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

5. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

6. REMOVE ENGINE UNDER COVER RH

7. REMOVE ENGINE UNDER COVER LH

8. DRAIN ENGINE COOLANT Testing and Inspection

9. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

10. REMOVE COOL AIR INTAKE DUCT SEAL Removal

11. REMOVE AIR CLEANER INLET ASSEMBLY Removal

12. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

13. REMOVE NO. 1 AIR CLEANER INLET Removal

14. REMOVE FRONT BUMPER ASSEMBLY Removal

15. REMOVE FRONT BUMPER ENERGY ABSORBER Disassembly

16. SEPARATE RADIATOR RESERVE TANK HOSE Removal

17. SEPARATE RADIATOR INLET HOSE Removal

18. SEPARATE RADIATOR OUTLET HOSE Removal

19. SEPARATE NO. 1 OIL COOLER INLET HOSE Removal

20. SEPARATE NO. 1 OIL COOLER OUTLET HOSE Removal

21. REMOVE RADIATOR SUPPORT UPPER Removal

22. REMOVE FAN SHROUD Removal

23. REMOVE RADIATOR ASSEMBLY Removal

24. REMOVE V-RIBBED BELT Removal

25. REMOVE GENERATOR ASSEMBLY

(a) Remove the terminal cap.





(b) Remove the nut and disconnect the wire harness from terminal B.

(c) Disconnect the generator connector from the generator assembly.

(d) Disconnect the connector from the compressor and magnetic clutch.

(e) Disconnect the 2 wire harness clamps.

(f) Remove the 2 bolts.





(g) Remove the bolt from the cylinder block.





(h) Disconnect the wire harness clamp and remove the generator assembly.

(i) Remove the bolt and wire harness clamp stay.





(j) Remove the bolt and bracket.