Removal

2GR-FE ENGINE CONTROL SYSTEM: THROTTLE BODY: REMOVAL

1. REMOVE ENGINE UNDER COVER LH

2. REMOVE ENGINE UNDER COVER RH

3. DRAIN ENGINE COOLANT Testing and Inspection

4. REMOVE COOL AIR INTAKE DUCT SEAL Removal

5. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

6. REMOVE AIR CLEANER INLET ASSEMBLY Removal

7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

(a) Disconnect the 3 vacuum hoses.

(b) Disconnect the mass air flow meter connector (*1).

(c) Disconnect the No. 2 ventilation hose (*2).

(d) Disconnect the hose band (*3).

(e) Disconnect the 3 bands, and remove the air cleaner cap sub-assembly.

8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

9. REMOVE NO. 1 AIR CLEANER INLET Removal

10. REMOVE THROTTLE BODY

(a) Disconnect the throttle body connector and clamp.

(b) Disconnect the 2 water by-pass hoses from the throttle body.

(d) Remove the throttle body gasket from the intake air surge tank.