Reading DTCs Procedure

ON-BOARD DIAGNOSIS [DSC/RSC]

Reading DTCs Procedure

1. Connect the M-MDS (IDS) to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the IDS.

- Select "Self Test".
- Select "Modules".
- Select "ABS".

3. Verify the DTC according to the directions on the screen.

- If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

4. After completion of repairs, clear all DTCs stored in the DSC/RSC. (See Clearing DTCs Procedures.) Clearing DTCs Procedure