Clearing DTCs Procedure

ON-BOARD DIAGNOSIS [DSC/RSC]

Clearing DTCs Procedures

1. Connect the M-MDS (IDS) to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the IDS.

- Select "Self Test".
- Select "Modules".
- Select "ABS".

3. Verify the DTC according to the directions on the screen.

4. Press the clear button on the DTC screen to clear the DTC.

5. Turn the ignition switch to the LOCK position.

6. Turn the ignition switch to the ON position and wait for 5 s or more.

7. Perform DTC inspection. (See Reading DTCs Procedure.) Reading DTCs Procedure

8. Verify that no DTCs are displayed.