Installation

A760F AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY: INSTALLATION

1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY





(a) Install the spring and check ball body.

Text in Illustration





(b) Insert the pin of the manual valve into the hole of the manual valve lever.





Text in Illustration





(c) Install the transmission valve body with the 19 bolts.





Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

HINT
Each bolt length is indicated below.

36 mm (1.42 in.) for bolt A

25 mm (0.984 in.) for bolt B

45 mm (1.77 in.) for bolt C

50 mm (1.97 in.) for bolt D

(d) Install the detent spring and detent spring cover with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. CONNECT TRANSMISSION WIRE Installation

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation

4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY Installation

5. ADD AUTOMATIC TRANSMISSION FLUID

(a) Add automatic transmission fluid Service and Repair.

6. RESET MEMORY

(a) Perform the Reset Memory procedures (A/T initialization) Programming and Relearning.