Installation

A760F AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION

1. INSTALL TRANSMISSION WIRE

(a) Coat a new O-ring with ATF and install it to the transmission wire connector.

(b) Install the transmission wire with the bolt.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(c) Connect the transmission wire connector.





HINT
Push up the lever until the claw of the transmission wire connector makes a connection sound.

2. CONNECT TRANSMISSION WIRE





(a) Connect the 9 solenoid valve connectors.

(b) Connect the 2 ATF temperature sensors with the 2 clamps and 2 bolts.

for bolt A - Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

for bolt B - Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

Text in Illustration





HINT
Each bolt length is indicated below.

12 mm (0.472 in.) for bolt A

36 mm (1.41 in.) for bolt B

(c) Attach the wire harness to the 2 clamps.

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY





(a) Coat a new O-ring with ATF and install it to the oil strainer.

(b) Install the oil strainer with the 4 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY





NOTICE:
Be careful not to spill oil on the contact surfaces of the transmission case and oil pan.

(a) Install a new gasket and the oil pan with the 20 bolts.

Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)

5. ADD AUTOMATIC TRANSMISSION FLUID

(a) Add automatic transmission fluid Service and Repair.