Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: CRAWL SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
- w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH Removal

3. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH Removal

4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH Removal

5. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH Removal

6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

7. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

8. REMOVE PARKING BRAKE HOLE COVER Removal

9. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY Removal

10. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

11. REMOVE LOWER POSITION INDICATOR HOUSING Disassembly

12. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY (CRAWL SWITCH)






(a) Disconnect the connector.
(b) Remove the 5 screws and integration control and panel from the position indicator housing.