Disassembly

AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: DISASSEMBLY

1. REMOVE SHIFT LOCK RELEASE BUTTON COVER






2. REMOVE SWITCH WIRE
(a) Disconnect the 5 connectors, detach the 3 clamps and remove the wire from the position indicator housing.






3. REMOVE CONSOLE BOX POCKET
(a) Detach the integration control & panel connector.
(b) Remove the 2 screws and console box pocket from the position indicator housing.






4. REMOVE LOWER POSITION INDICATOR HOUSING
(a) Remove the 4 screws and lower position indicator housing from the position indicator housing.






5. REMOVE POSITION INDICATOR LENS
(a) Detach the 4 claws and remove the position indicator lens from the lower position indicator housing.






6. REMOVE POSITION INDICATOR SLIDE COVER
(a) Remove the position indicator slide cover together with the No. 2 position indicator slide cover.
(b) Remove the No. 2 position indicator slide cover from the position indicator slide cover.






7. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
(a) Detach the indicator light wire connector.
(b) Using a small screwdriver, detach the claw and pull out the indicator light wire from the lower position indicator housing.






8. REMOVE SHIFT LOCK RELEASE BUTTON
(a) Detach the 2 claws and remove the shift lock release button and spring from the lower position indicator housing.






9. REMOVE INTEGRATION CONTROL & PANEL SUB-ASSEMBLY
(a) Remove the 5 screws, and then remove the integration control & panel from the position indicator housing.






10. REMOVE NO. 1 PATTERN SELECT SWITCH ASSEMBLY
(a) Using a small screwdriver, detach the 2 claws and remove the pattern select switch from the position indicator housing.






11. REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
(a) Disconnect the shift lock solenoid connector.
(b) Detach the 3 claws and remove the ECU from the transmission floor shift.