Front

1. Raise and support vehicle, then remove front wheel and tire assembly.
2. Remove anti-lock brake sensor bolt and pull sensor from front wheel spindle.
3. Remove two anti-lock brake sensor cable bracket bolts and two sensor cable brackets.
4. Push anti-lock brake sensor cable grommet through wheel well.
5. Disconnect anti-lock brake sensor electrical connector in engine compartment and pull harness retainer from vehicle.
6. Remove front brake anti-lock sensor from vehicle.
7. Reverse procedure to install, noting the following:
8. Torque sensor bolt to 124-133 in lb.
9. Torque wheel hub bolt nuts to 78-87 ft lb.