Seat Temperature Element: Service and Repair

Seat Heater Element Replacement - Front

Removal Procedure

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure Service and Repair in Engine Electrical.
2. Remove the rear console compartment.




3. Disconnect the SIR and the heated seat wiring harness.
4. Remove the seat back and the cushion. Refer to Seat Back Replacement - Front Seat Back Replacement - Front and to Seat Cushion Replacement - Front Seat Cushion Replacement - Front.
5. Remove the hog rings from the seat back and the cushion.
6. Remove the seat cover from the seat back and the cushion.
7. Peel the heater element off of the cushion.

Installation Procedure




1. Install the heater element to the cushion.
2. Install the seat cover to the seat back and the cushion.
3. Install new hog rings to the seat back and the cushion.
4. Install the seat back and the cushion. Refer to Seat Back Replacement - Front Seat Back Replacement - Front and to Seat Cushion Replacement - Front Seat Cushion Replacement - Front.
5. Connect the SIR and the heated seat wiring harness.
6. Install the rear console compartment.
7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure Service and Repair in Engine Electrical.