Inflatable Restraint Instrument Panel Module Replacement

Caution: Refer to Inflator Module Handling And Storage Caution in Cautions and Notices.

Removal Procedure
1. Disable the SIR system.
2. Remove the right front kick panel.
3. Remove the Instrument Panel (IP) compartment (2).
4. Disconnect the Inflatable Restraint IP module connector (1).
5. Remove the Inflatable Restraint IP module fasteners (2,3)
6. Remove the Inflatable Restraint IP module (1).

Installation Procedure
1. Install the Inflatable Restraint IP module (1) to the carrier.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the IP module mounting fasteners (2,3).

Tighten
Tighten fasteners to 18 N.m (13 lb ft).

3. Connect the IP module connector (1).
4. Install the IP compartment (2).
5. Install the right front kick panel.