A-Pillar Trim Panel, Upper

A-Pillar Trim Panel, Upper

Special tools, testers and auxiliary items required

• Trim Removal Wedge (RMCP101)

Removing






- Remove the trim covers and screws from the A-pillar, if equipped with a passenger side assist handle.

- Using trim removal wedge (RMCP101) , gently pry off the A-pillar trim from A-pillar.

- Using a small screwdriver or equivalent, press downward the disengaging tether clip (2) and slide it from the housing (1).

Installing






- Position the A-pillar trim to A-pillar.

- Slide the tether downward through the housing (1) until the clip engages (2).

- Firmly seat the A-pillar trim into the slots on the A-pillar.

- Install the screws and trim covers to the A-pillar, if equipped with a passenger side assist handle.