Rear Quarter Trim Panel

Rear Quarter Trim Panel

Removing






- Remove the liftgate door sill plate. Refer to => [ Liftgate Door Sill Plate ] Liftgate Door Sill Plate.

- Remove the D-pillar upper trim panel. Refer to => [ D-Pillar Trim Panel, Upper ] D-Pillar Trim Panel, Upper.

- Remove the quarter trim panel bolster. Refer to => [ Rear Quarter Trim Panel Bolster ] Rear Quarter Trim Panel Bolster.

- Remove the third row lower seat belt anchor (4).

- Remove the second row seat belt guide bolt, right quarter trim panel only.

- Remove the third row upper seat belt guide bolt.

- Remove the rear quarter trim panel screws.

- Pull the rear quarter trim panel from the inner quarter panel (1).

- Disconnect the auxiliary power outlet and power inverter (2) wire harness connectors (3), if equipped, left quarter trim only.

- Remove the rear quarter trim panel (5).

Installing






- Position the left rear quarter trim panel (5) into the vehicle.

- Connect the auxiliary power outlet and power inverter (2) wire harness connectors (3), if equipped, left quarter trim only.

- Align the rear quarter trim panel over the slots on the inner quarter panel (1) and firmly snap into place.

- Install the rear quarter trim panel screws.

- Install the second row seat belt guide bolt right quarter trim only.

- Install the third row upper guide bolt.

- Install the third row lower seat belt guide anchor (4).

- Install the rear quarter trim bolster. Refer to => [ Rear Quarter Trim Panel Bolster ] Rear Quarter Trim Panel Bolster.

- Install the upper D-pillar upper trim panel. Refer to => [ D-Pillar Trim Panel, Upper ] D-Pillar Trim Panel, Upper.

- Install the liftgate door sill plate. Refer to => [ Liftgate Door Sill Plate ] Liftgate Door Sill Plate.