Shift Cable: Adjustments

Adjusting
- Selector lever cable disconnected from selector shaft lever.
- Shift selector lever into "P" position.
- Shift selector shaft lever to "P." parking lock must engage.





- Loosen bolts (arrows) securing support bracket to transmission.
- Press selector lever cable onto selector shaft lever.
- Align selector lever cable, free of stress, on support bracket using oblong holes.
- Tighten securing bolts (arrows) for support bracket.
Tightening torque: 23 Nm (17 ft. lbs.)
- Install left-hand protective plate on transmission.
- Check selector lever mechanism. Testing and Inspection