Shift Cable: Adjustments

CHECKING
- Remove selector lever cable combi-bolt from lever/selector shaft
- Move selector lever from "P" to "1".
Shift mechanism and selector lever cable must move freely. If necessary replace selector lever cable or service shift mechanism.
- Always replace selector lever locking washer at transmission lever after disassembling.

ADJUSTING (Selector Lever In "P" Position)
- Loosen selector lever cable bolt on selector shaft lever.
- Bring selector shaft lever in position "P" on transmission.
Locking lever must engage in park lock wheel, both front wheels locked.
- In this position tighten selector shaft lever bolt
Tightening torque: 25 Nm (18 ft lb)