Power Steering Pump: Service and Repair

NOTE:
- Always replace seals.
- Do not reuse hydraulic oil that has been drained.






1- Bracket
- On vehicles equipped with A/C, the bracket can only be removed after first removing the A/C compressor bracket

2- Socket-head bolt
- M8 x 30
- Tighten to: 25 Nm (18 ft. lb.)

3- Bolt
- M8 x 28
- Tighten to: 25 Nm (18 ft. lb.)

4- Socket-head bolt
- M8 x 38
- Tighten to: 25 Nm (18 ft. lb.)

5- Washer

6- Bolt
- M8 x 20
- Tighten to: 25 Nm (18 ft. lb.)

7- Socket-head bolt
- M8 x 30
- Tighten to: 25 Nm (18 ft. lb.)

8- Socket-head bolt
- M8 x 30
- Tighten to: 25 Nm (18 ft. lb.)

9- Hex bolt
- M8 x 30
- Tighten to: 25 Nm (18 ft. lb.)

10- Socket-head bolt
- M8 x 20
- Tighten to: 25 Nm (18 ft. lb.)

11- Socket-head bolt
- M8 x 30
- Tighten to: 25 Nm (18 ft. lb.)

12- Hex bolt
- M8 x 30
- Tighten to: 25 Nm (18 ft. lb.)

13- Pulley

14- Socket-head bolt
- Tighten to: 20 Nm (15 ft. lb.)
- Counter hold using 10 mm hex wrench in hub. It may be necessary to reduce the hex wrench to 9.5 mm

15- Ribbed belt
- Tensioned by spring-operated roller

16- Suction hose

17- Hose clamp

18- Sealing ring

19- Pressure line

20- Banjo bolt
- Tighten to: 30 Nm (22 ft. lb.)

21- Power steering pump
- Delivery pressure: 85-95 bar (1233-1378 psi)
- Fill with oil before installing

22- Mounting bracket
- No longer supplied as replacement part; bracket -1- supplied instead
- On vehicles equipped with A/C, the mounting bracket can only he removed after first removing the A/C compressor bracket