Installation

HYBRID / BATTERY CONTROL: BATTERY BLOWER: INSTALLATION

1. INSTALL BATTERY COOLING BLOWER ASSEMBLY

NOTICE:
* Be sure not to touch the fan part of the battery cooling blower assembly.
* Do not lift the battery cooling blower assembly using the wire harness.

(a) Install the battery cooling blower assembly with the 2 bolts and nut.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(b) Connect the battery cooling blower assembly connector and clamp.

(c) Connect the 2 wire harness clamps.

2. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT Installation

3. INSTALL NO. 1 HYBRID BATTERY EXHAUST DUCT Installation

4. INSTALL REAR SEAT ASSEMBLY RH

Installation

5. INSTALL REAR NO. 1 FLOOR BOARD Installation

6. INSTALL FRONT DECK FLOOR BOX Installation

7. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Installation

8. INSTALL DECK FLOOR BOX RH Installation

9. INSTALL REAR DECK FLOOR BOX Installation

10. INSTALL NO. 2 DECK BOARD Installation

11. INSTALL NO. 1 DECK BOARD Installation

12. INSTALL DECK BOARD ASSEMBLY Installation