Removal

PARKING BRAKE: PARKING BRAKE CABLE: REMOVAL

HINT
* The following procedure is for the No. 1 parking brake cable assembly and No. 3 parking brake cable assembly.
* Use the same procedure for the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly.

1. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

Removal

2. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the adjusting nut.

(b) Pull up the parking brake pedal claw.

(d) Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

3. REMOVE NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY

(a) Separate the No. 3 parking brake cable assembly from the No. 1 parking brake pull rod sub-assembly as shown in the illustration.

Text in Illustration

(b) Separate the No. 2 parking brake cable assembly to remove the No. 1 parking brake pull rod sub-assembly.

HINT
Perform the same procedure as for the No. 3 parking brake cable assembly.

4. REMOVE FRONT EXHAUST PIPE ASSEMBLY

Removal

5. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR

(a) Remove the 3 nuts and front No. 2 floor heat insulator.

6. SEPARATE PARKING BRAKE SHOE LEVER

Disassembly

7. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the bolt and separate the No. 3 parking brake cable assembly from the parking plate sub-assembly.

(b) Remove the 5 bolts and No. 3 parking brake cable assembly.