Installation

STEERING COLUMN: STEERING WHEEL: INSTALLATION

1. INSTALL LOWER STEERING WHEEL BOSS COVER

(a) Engage the 2 pins and 4 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.





2. INSTALL CRUISE CONTROL SWITCH WIRE (w/ Cruise Control System)

3. INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System) Installation

4. INSTALL STEERING PAD SWITCH ASSEMBLY Installation

5. INSTALL STEERING SHAKE DAMPER

(a) Install the steering shake damper to the steering wheel assembly with the 2 screws.





Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)

6. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

7. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY Installation

8. INSTALL STEERING WHEEL ASSEMBLY

(a) Align the matchmarks on the steering wheel assembly and steering main shaft.





Text in Illustration





(b) Install the steering wheel assembly set nut.

Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)

(c) Connect the connectors to the spiral cable sub-assembly.

9. CHECK STEERING WHEEL CENTER POINT

10. INSTALL STEERING PAD

HINT
Refer to the instructions for Installation of the steering pad Installation.