Removal

PARKING BRAKE: PARKING BRAKE CABLE: REMOVAL

1. REMOVE REAR WHEEL

2. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

HINT
Refer to the instructions for Removal of the parking brake control pedal assembly Removal.

3. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the adjusting nut.

(b) Pull up the parking brake pedal claw.

(d) Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

4. REMOVE FRONT EXHAUST PIPE ASSEMBLY

HINT
Refer to the instructions for Removal of the front exhaust pipe assembly Removal.

5. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR

(a) Remove the 3 nuts and front No. 2 floor heat insulator.

6. REMOVE REAR FLOOR SIDE MEMBER COVER LH (w/ Floor Under Cover) Removal

7. REMOVE NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY

(a) Separate the No. 3 parking brake cable assembly from the No. 1 parking brake pull rod sub-assembly as shown in the illustration.

(b) Separate the No. 2 parking brake cable assembly to remove the No. 1 parking brake pull rod sub-assembly.

HINT
Perform the same procedure as for the No. 3 parking brake cable assembly.

8. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

(a) Disengage the clamp to separate the No. 2 parking brake cable clamp.

(b) Separate the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

Text in Illustration

HINT
Insert an offset wrench (14 mm) at the base of the No. 3 parking brake cable assembly as shown in the illustration to disengage the clip. Pull out the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

(d) Remove the 5 bolts and No. 3 parking brake cable assembly.

9. REMOVE NO. 2 PARKING BRAKE CABLE CLAMP

(a) Disengage the 2 claws to remove the No. 2 parking brake cable clamp from the No. 3 parking brake cable assembly.