Installation

2GR-FE BATTERY / CHARGING: GENERATOR: INSTALLATION

1. INSTALL GENERATOR ASSEMBLY

(a) Install the generator assembly with the 2 bolts.

Torque : 43 Nm (438 kgf-cm, 32 ft-lbf)

(b) Connect the wire harness clamp.

(c) Install the generator bracket with the 2 bolts.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(d) Connect the generator connector to the generator assembly.

(e) Install the generator wire with the bolt.

Torque : 8.4 Nm (86 kgf-cm, 74 in-lbf)

(f) Install the nut and connect the wire harness to terminal B.

Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

(g) Install the terminal cap.

2. INSTALL V-RIBBED BELT

Installation.

3. INSTALL RADIATOR ASSEMBLY

Installation.

4. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.