Removal

2GR-FE INTAKE / EXHAUST: EXHAUST PIPE: REMOVAL

1. REMOVE TAIL EXHAUST PIPE ASSEMBLY LH

(a) Remove the 2 nuts.





(b) Remove the tail exhaust pipe assembly LH from the 2 exhaust pipe supports.

(c) Remove the gasket from the center exhaust pipe assembly.

2. REMOVE TAIL EXHAUST PIPE ASSEMBLY

(a) Remove the 2 nuts.





(b) Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.

(c) Remove the gasket from the center exhaust pipe assembly.

3. REMOVE EXHAUST PIPE DAMPER

(a) Remove the 2 bolts and exhaust pipe damper.





4. REMOVE CENTER EXHAUST PIPE ASSEMBLY

(a) Remove the 2 bolts and 2 nuts.





(b) Remove the center exhaust pipe assembly from the 2 exhaust pipe supports.

(c) Remove the gasket from the front exhaust pipe assembly.

5. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

6. REMOVE ENGINE UNDER COVER RH

7. REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET (for Front Side)

(a) Remove the 2 nuts and No. 1 exhaust pipe support bracket (for Front Side).





8. REMOVE FRONT EXHAUST PIPE ASSEMBLY

(a) Disconnect the 2 wire harnesses from the clamp.





(b) Disconnect the 2 heated oxygen sensor connectors.

(c) Remove the 2 bolts and 2 nuts.





(d) Remove the front exhaust pipe assembly from the No. 1 exhaust pipe support bracket (for Rear Side).

(e) Remove the 2 gaskets from the front exhaust pipe assembly.

9. REMOVE HEATED OXYGEN SENSOR (for Bank 1) Removal

10. REMOVE HEATED OXYGEN SENSOR (for Bank 2) Removal