Installation

2GR-FE INTAKE / EXHAUST: EXHAUST PIPE: INSTALLATION

1. INSTALL HEATED OXYGEN SENSOR (for Bank 2) Installation

2. INSTALL HEATED OXYGEN SENSOR (for Bank 1) Installation

3. INSTALL FRONT EXHAUST PIPE ASSEMBLY

(a) Install 2 new gaskets to the front exhaust pipe assembly.

(b) Connect the front exhaust pipe assembly to the No. 1 exhaust pipe support bracket (for Rear Side).

(c) Install the front exhaust pipe assembly with the 2 bolts and 2 nuts.

Torque : 55 Nm (561 kgf-cm, 40 ft-lbf)

(d) Connect the 2 heated oxygen sensor connectors.

(e) Install the 2 wire harnesses to the clamp.

4. INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET (for Front Side)

(a) Install the No. 1 exhaust pipe support bracket with the 2 nuts (for Front Side).

Torque : 33 Nm (337 kgf-cm, 24 ft-lbf)

5. INSTALL ENGINE UNDER COVER RH

6. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

7. INSTALL CENTER EXHAUST PIPE ASSEMBLY

(a) Install a new gasket to the front exhaust pipe assembly.

(b) Connect the center exhaust pipe assembly to the exhaust pipe supports.

(c) Install the center exhaust pipe assembly with the 2 bolts and 2 nuts.

Torque : 49 Nm (500 kgf-cm, 36 ft-lbf)

8. INSTALL EXHAUST PIPE DAMPER

(a) Install the exhaust pipe damper with the 2 bolts.

Torque : 19 Nm (194 kgf-cm, 14 ft-lbf)

9. INSTALL TAIL EXHAUST PIPE ASSEMBLY

(a) Install a new gasket to the center exhaust pipe assembly.

(b) Connect the tail exhaust pipe assembly to the 3 exhaust pipe supports.

(c) Install the tail exhaust pipe assembly with the 2 nuts.

Torque : 43 Nm (438 kgf-cm, 32 ft-lbf)

10. INSTALL TAIL EXHAUST PIPE ASSEMBLY LH

(a) Install a new gasket to the center exhaust pipe assembly.

(b) Connect the tail exhaust pipe assembly LH to the 2 exhaust pipe supports.

(c) Install the tail exhaust pipe assembly LH with the 2 nuts.

Torque : 43 Nm (438 kgf-cm, 32 ft-lbf)

11. INSPECT FOR EXHAUST GAS LEAK