Removal

FRONT SUSPENSION: FRONT LOWER BALL JOINT: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. REMOVE FRONT AXLE ASSEMBLY

Removal

2. REMOVE FRONT LOWER BALL JOINT ASSEMBLY

(a) Secure the front axle assembly in a vise using aluminum plates.

NOTICE:
When using a vise, do not overtighten it.

(b) Remove the cotter pin and nut.





(c) Install SST to the front lower ball joint assembly as shown in the illustration.

SST : 09960-20010

09961-02050

09961-02050





NOTICE:
Check that the clearance measurement between SST and the front axle assembly is 1 mm (0.0394 in.).

(d) Using SST, remove the front lower ball joint assembly from the front axle assembly as shown in the illustration.

SST : 09960-20010

09961-02010

09961-02050

09961-02050





Text in Illustration





CAUTION:
Apply grease to the threads and end of the SST bolt.

NOTICE:
* Install SST so that A and B are parallel.
* Be sure to place a wrench on the part indicated in the illustration.
* Do not damage the front lower ball joint dust cover.