Disassembly

LIGHTING (EXT): HEADLIGHT ASSEMBLY: DISASSEMBLY

1. REMOVE NO. 1 HEADLIGHT BULB

(a) Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.





NOTICE:
Do not touch the bulb glass.

2. REMOVE NO. 2 HEADLIGHT BULB (for Halogen Headlight)

(a) Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.





NOTICE:
Do not touch the bulb glass.

3. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY (for HID Headlight)

(a) for LH Side:

(1) Turn the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect it.





NOTICE:
* Do not apply excessive force using a tool.
* Do not damage the O-ring or allow it to become contaminated with foreign matter. If the O-ring is damaged or contaminated, water may get into the headlight assembly, resulting in a malfunction of the headlight light control ECU sub-assembly.

(b) for RH Side:

(1) Turn the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect it.





NOTICE:
* Do not apply excessive force using a tool.
* Do not damage the O-ring or allow it to become contaminated with foreign matter. If the O-ring is damaged or contaminated, water may get into the headlight assembly, resulting in a malfunction of the headlight light control ECU sub-assembly.

(c) Disengage the clamp.





(d) Turn the socket of the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and remove it.

NOTICE:
Do not pull the headlight light control ECU sub-assembly with the socket connected.

4. REMOVE DISCHARGE HEADLIGHT BULB (for HID Headlight)

(a) Release the set spring as shown in the illustration and remove the discharge headlight bulb.





NOTICE:
Do not touch the bulb glass.

5. REMOVE HEADLIGHT SOCKET COVER

(a) for Halogen Headlight:

(1) Remove the 2 headlight socket covers from the headlight unit.

(b) for HID Headlight:

(1) Remove the headlight socket cover from the headlight unit.

6. REMOVE FRONT TURN SIGNAL LIGHT BULB

(a) Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.





(b) Remove the front turn signal light bulb from the front turn signal light socket.

7. REMOVE FRONT SIDE MARKER LIGHT BULB

(a) Turn the front side marker light socket with the front side marker light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.





(b) Remove the front side marker light bulb from the front side marker light socket.