Removal

PARKING BRAKE: PARKING BRAKE PEDAL: REMOVAL

1. REMOVE SHIFT LEVER SUPPORT

* for U660E:

* for U760E: Removal

2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY Removal

3. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (for Built-in Type Yaw Rate Sensor)

w/ Smart Key System: Removal

4. REMOVE YAW RATE SENSOR (for Separate Type Yaw Rate Sensor) Removal

5. REMOVE NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (for Separate Type Yaw Rate Sensor)

w/ Smart Key System: Removal

6. REMOVE YAW RATE SENSOR BRACKET (for Separate Type Yaw Rate Sensor) Removal

7. REMOVE FLOOR CARPET BRACKET RH Removal

8. REMOVE AIRBAG SENSOR ASSEMBLY Removal

9. LOOSEN ADJUSTING NUT

(a) Remove the lock nut and loosen the adjusting nut.





Text in Illustration





10. SEPARATE NO. 4 PARKING BRAKE CABLE ASSEMBLY

(a) Separate the No. 4 parking brake cable assembly from the parking brake control pedal assembly as shown in the illustration.





Text in Illustration





11. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

(a) Turn back the floor carpet.

(b) Remove the clip from the No. 1 parking brake cable assembly.





(c) Remove the bolt and 2 nuts, and separate the No. 1 parking brake cable assembly.

(d) Disconnect the parking brake switch connector.





(e) Remove the bolt, 2 nuts and parking brake control pedal assembly.