Installation

EXTERIOR PANELS / TRIM: REAR SPOILER: INSTALLATION

1. INSTALL NO. 3 REAR SPOILER PROTECTOR

(a) Clean the rear spoiler.

(1) Remove any double-sided tape from the rear spoiler.

(2) Wipe off any tape adhesive residue with cleaner.

(b) Install 2 new No. 3 rear spoiler protectors.

(1) Remove the release paper from the 2 No. 3 rear spoiler protectors.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(2) Install a 2 new No. 3 rear spoiler protectors.

2. INSTALL NO. 4 REAR SPOILER PROTECTOR

(a) Clean the rear spoiler.

(1) Remove any double-sided tape from the rear spoiler.

(2) Wipe off any tape adhesive residue with cleaner.

(b) Install 2 new No. 4 rear spoiler protectors.

(1) Remove the release paper from the 2 No. 4 rear spoiler protectors.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(2) Install 2 new No. 4 rear spoiler protectors as shown in the illustration.





Standard Measurement





3. INSTALL NO. 5 REAR SPOILER PROTECTOR

(a) Clean the rear spoiler.

(1) Remove any double-sided tape from the rear spoiler.

(2) Wipe off any tape adhesive residue with cleaner.

(b) Install 2 new No. 5 rear spoiler protectors.

(1) Remove the release paper from the 2 No. 5 rear spoiler protectors.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(2) Install a 2 new No. 5 rear spoiler protectors as shown in the illustration.





Standard Measurement





4. INSTALL REAR SPOILER SUB-ASSEMBLY

(a) When replacing the rear spoiler with a new one:

(1) Install the 2 stud bolts to the rear spoiler.

(b) Install 2 new gaskets to the rear spoiler.

(c) Install 4 new clips to the rear spoiler.

(d) Clean the rear spoiler.

(1) Remove any double-sided tape from the rear spoiler.

(2) Wipe off any tape adhesive residue with cleaner.

(e) Install a new No. 2 rear spoiler protector.

(1) Remove the release paper from the No. 2 rear spoiler protector.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(2) Install a new No. 2 rear spoiler protector.

HINT
Use the same procedure for the RH side and LH side.

(f) Install the No. 1 rear spoiler protector.

(1) Remove the release paper from the No. 1 rear spoiler protector.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(2) Install the No. 1 rear spoiler protector as shown in the illustration.





Standard Measurement





(g) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(h) Install the rear spoiler sub-assembly.

(1) Using a heat light, heat the vehicle body and rear spoiler sub-assembly.

(2) Remove the release paper from the rear spoiler sub-assembly.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Engage the 4 clips.





(4) Install the rear spoiler sub-assembly with the 2 nuts.

5. INSTALL LUGGAGE COMPARTMENT DOOR COVER Reassembly