Reassembly
SEAT: FRONT SEAT ASSEMBLY (for SIA Made Manual Seat): REASSEMBLY
1. INSTALL SEAT TRACK ADJUSTING HANDLE
(a) Engage the 2 springs to install the seat track adjusting handle.
2. INSTALL SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY
(a) Engage the 4 guides to install the separate type front seatback spring assembly.
(b) Install the 4 bolts.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
3. INSTALL FRONT SEAT WIRE RH (for Front Passenger Side)
(a) Connect the connectors and engage the wire harness clamps to install the front seat wire RH.
4. INSTALL OCCUPANT DETECTION ECU (for Front Passenger Side) Installation
5. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)
(a) Engage the 3 claws to install the front seat cushion edge protector LH.
(b) Install the screw.
6. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)
(a) Engage the 3 claws to install the front seat cushion edge protector RH.
(b) Install the screw.
7. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)
(a) Engage the 3 claws to install the front seat cushion edge protector LH.
(b) Install the screw.
8. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)
(a) Engage the 3 claws to install the front seat cushion edge protector RH.
(b) Install the screw.
9. INSTALL RECLINING ADJUSTER INSIDE COVER LH
(a) Engage the guide to install the reclining adjuster inside cover LH.
10. INSTALL RECLINING ADJUSTER INSIDE COVER RH
(a) Engage the guide to install the reclining adjuster inside cover RH.
11. INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)
(a) Engage the clip to install the front seat lower cushion shield LH.
(b) Engage the hook as shown in the illustration.
(c) Install the screw.
12. INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)
(a) Engage the clip to install the front seat lower cushion shield RH.
(b) Engage the hook as shown in the illustration.
(c) Install the screw.
13. INSTALL SEPARATE TYPE FRONT SEATBACK COVER
(a) Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 6 new hog rings.
NOTICE:
* Be careful not to damage the separate type front seatback cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.
14. INSTALL FRONT SEAT AIRBAG ASSEMBLY Installation
15. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
(a) Temporarily install the separate type front seatback cover with pad.
(b) Engage the 4 claws to install the 2 front seat headrest supports.
(c) Install the 3 brackets with the 2 nuts.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
CAUTION:
* For vehicles with a front seat airbag assembly, the separate type front seatback cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.
* Make sure that the strap is not twisted after installing the nut.
* Install the bracket securely.
(d) Turn back the separate type front seatback cover.
(e) Using hog ring pliers, install the 2 new hog rings.
NOTICE:
* Be careful not to damage the separate type front seatback cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.
(f) Using hog ring pliers, install 3 new hog rings.
(g) Using hog ring pliers, install 5 new hog rings.
NOTICE:
* Be careful not to damage the separate type front seatback cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.
16. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
(a) Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 16 new hog rings.
NOTICE:
* Be careful not to damage the separate type front seat cushion cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.
(b) Using hog ring pliers, install 2 new hog rings.
NOTICE:
* Be careful not to damage the separate type front seat cushion cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.
17. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
(a) Temporarily install the separate type front seat cushion cover with pad.
(b) Engage each hook.
(c) Engage the claw and 3 clamps to install the front seat airbag assembly wire harness.
(d) Engage the fastener to secure the front seat airbag assembly wire harness.
18. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side) Installation
19. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side) Installation
20. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Driver Side)
(a) Engage the 5 claws and 6 guides to install the front seat inner cushion shield.
21. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)
(a) Engage the 5 claws and 7 guides to install the front seat inner cushion shield.
22. INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side)
(a) Engage the 5 claws, 6 guides and clip to install the front seat cushion shield.
(b) Install the screw.
23. INSTALL FRONT SEAT CUSHION SHIELD (for Front Passenger Side)
(a) Engage the 5 claws, 7 guides and clip to install the front seat cushion shield.
(b) Install the screw.
24. CONNECT SEPARATE TYPE FRONT SEATBACK COVER
(a) Connect the rubber band of the separate type front seatback cover.
25. INSTALL VERTICAL ADJUSTING HANDLE (for Driver Side)
(a) Install the vertical adjusting handle with the screw.
26. INSTALL RECLINING ADJUSTER RELEASE HANDLE
(a) Engage the claw to install the reclining adjuster release handle.
27. INSTALL SEAT ADJUSTER COVER CAP
(a) Install the 2 seat adjuster cover caps.