Outer Rear View Mirror

MIRROR (EXT): OUTER REAR VIEW MIRROR: INSPECTION

1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH

(a) Check the operation of the mirror surface (w/ Daytime Running Light Control).

(1) Disconnect the outer rear view mirror assembly RH connector.





(2) Apply battery voltage and check the operation of the mirror.

OK:





Text in Illustration





If the result is not as specified, replace the outer rear view mirror assembly RH.

(b) Check the operation of the mirror surface (w/o Daytime Running Light Control).

(1) Disconnect the outer rear view mirror assembly RH connector.





(2) Apply battery voltage and check the operation of the mirror.

OK:





Text in Illustration





If the result is not as specified, replace the outer rear view mirror assembly RH.

(c) Check the operation of the retractable mirror (w/o Daytime Running Light Control).

NOTICE:
* Disconnect and reconnect the battery between each mirror position check.
* The mirror position cannot be changed manually when the battery is connected. To change the mirror position manually, the battery must be disconnected first.

(1) Disconnect the outer rear view mirror assembly RH connector.





(2) For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror's movement.

OK:





Text in Illustration





If the result is not as specified, replace the outer rear view mirror assembly RH.

(d) Check the operation of the mirror heater (w/ Mirror Heater and Daytime Running Light Control).

(1) Disconnect the outer rear view mirror assembly RH connector.





Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





If the result is not as specified, replace the outer rear view mirror assembly RH.

(2) Connect the cable from the positive (+) terminal to terminal 2 and the negative battery (-) terminal to terminal 5, then check that the mirror becomes warm.

HINT
It takes a short time for the mirror to become warm.

OK:

Mirror becomes warm.

If the result is not as specified, replace the outer rear view mirror assembly RH.

(e) Check the operation of the mirror heater (w/ Mirror Heater and w/o Daytime Running Light Control).

(1) Disconnect the outer rear view mirror assembly RH connector.





(2) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





If the result is not as specified, replace the outer rear view mirror assembly RH.

(3) Connect the cable from the positive (+) terminal to terminal 2 and the negative battery (-) terminal to terminal 8, then check that the mirror becomes warm.

HINT
It takes a short time for the mirror to become warm.

OK:

Mirror becomes warm.

If the result is not as specified, replace the outer rear view mirror assembly RH.

2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH

(a) Check the operation of the mirror surface (w/ Daytime Running Light Control).

(1) Disconnect the outer rear view mirror assembly LH connector.





(2) Apply battery voltage and check the operation of the mirror.

OK:





Text in Illustration





If the result is not as specified, replace the outer rear view mirror assembly LH.

(b) Check the operation of the mirror surface (w/o Daytime Running Light Control).

(1) Disconnect the outer rear view mirror assembly LH connector.





(2) Apply battery voltage and check the operation of the mirror.

OK:





Text in Illustration





If the result is not as specified, replace the outer rear view mirror assembly LH.

(c) Check the operation of the retractable mirror (w/o Daytime Running Light Control).

NOTICE:
* Disconnect and reconnect the battery between each mirror position check.
* The mirror position cannot be changed manually when the battery is connected. To change the mirror position manually, the battery must be disconnected first.

(1) Disconnect the outer rear view mirror assembly LH connector.





(2) For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror's movement.

OK:





Text in Illustration





If the result is not as specified, replace the outer rear view mirror assembly LH.

(d) Check the operation of the mirror heater (w/ Mirror Heater and Daytime Running Light Control).

(1) Disconnect the outer rear view mirror assembly LH connector.





(2) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





If the result is not as specified, replace the outer rear view mirror assembly LH.

(3) Connect the cable from the positive (+) terminal to terminal 2 and the negative battery (-) terminal to terminal 5, then check that the mirror becomes warm.

HINT
It takes a short time for the mirror to become warm.

OK:

Mirror becomes warm.

If the result is not as specified, replace the outer rear view mirror assembly LH.

(e) Check the operation of the mirror heater (w/ Mirror Heater and w/o Daytime Running Light Control).

(1) Disconnect the outer rear view mirror assembly LH connector.





(2) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





If the result is not as specified, replace the outer rear view mirror assembly LH.

(3) Connect the cable from the positive (+) terminal to terminal 2 and the negative battery (-) terminal to terminal 8, then check that the mirror becomes warm.

HINT
It takes a short time for the mirror to become warm.

OK:

Mirror becomes warm.

If the result is not as specified, replace the outer rear view mirror assembly LH.