Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SPIRAL CABLE: REMOVAL

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE STEERING PAD





(a) Using "TORX" socket wrench T30, loosen the 2 bolts completely.

(b) Pull the steering pad toward you.

(c) Using a thin-bladed screwdriver, release the locking button.





(d) Using a thin-bladed screwdriver, disconnect the 2 airbag connectors.

(e) Detach the horn connector.

3. REMOVE STEERING WHEEL ASSEMBLY Removal

4. REMOVE STEERING COLUMN COVER





(a) Remove the 3 screws.

(b) Disengage the 2 claws and remove the steering column cover (lower).

(c) Disengage the 2 claws and remove the steering column cover (upper).

5. REMOVE SPIRAL CABLE (w/o VSC)





(a) Detach the horn connector.

(b) Slide the slider and detach the airbag connector.

(c) Disengage the 3 claws and remove the spiral cable.





6. REMOVE SPIRAL CABLE (w/ VSC)





(a) Detach the horn connector.

(b) Slide the slider and detach the airbag connector.

(c) Detach the steering sensor connector.

(d) Disengage the 3 claws and remove the spiral cable.





7. REMOVE STEERING SENSOR (w/ VSC)





(a) Disengage the 6 claws, and remove the steering sensor from the spiral cable.