Entire Combination Meter Does Not Operate

METER: METER / GAUGE SYSTEM (for Hatchback): Entire Combination Meter does not Operate
- Entire Combination Meter does not Operate

DESCRIPTION

This circuit provides power to the combination meter assembly.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK FUSE (ECU-B, MET)

(a) Remove the ECU-B fuse from the engine room relay block.





(b) Remove the MET fuse from the main body ECU.

(c) Measure the resistance.

Standard resistance:

Below 1Ohms

(d) Reinstall the fuse.

NG -- CHECK SHORT CIRCUIT IN COMPONENTS AND WIRES CONNECTED TO FUSE
OK -- Continue to next step.

2. INSPECT COMBINATION METER ASSEMBLY





(a) Disconnect the D1 combination meter connector.

(b) Measure the resistance.

Standard resistance:





(c) Measure the voltage.

Standard voltage:





(d) Reconnect the combination meter connector.

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- REPLACE COMBINATION METER ASSEMBLY