Installation

1NZ-FE COOLING: THERMOSTAT: INSTALLATION

1. INSTALL THERMOSTAT

(a) Install a new gasket onto the thermostat.

(b) Install the thermostat with the jiggle valve facing upward.





HINT
The jiggle valve may be set within 10° on either side, as shown in the illustration.

2. INSTALL WATER INLET





(a) Install the water inlet with radiator hose with the 2 nuts.

Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

3. ADD ENGINE COOLANT Service and Repair

4. CHECK FOR ENGINE COOLANT LEAKAGE Testing and Inspection