Installation

STEERING COLUMN: STEERING WHEEL: INSTALLATION

1. INSTALL LOWER STEERING WHEEL BOSS COVER

(a) Engage the 2 pins and 4 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.





2. INSTALL CRUISE CONTROL SWITCH WIRE (w/ Cruise Control System)

3. INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System) Installation

4. INSTALL STEERING PAD SWITCH ASSEMBLY Installation

5. INSTALL STEERING SHAKE DAMPER

(a) Install the steering shake damper to the steering wheel assembly with the 2 screws.





Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)

6. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

7. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY Installation

8. INSTALL STEERING WHEEL ASSEMBLY

(a) Align the matchmarks on the steering wheel assembly and steering main shaft.









(b) Install the steering wheel assembly set nut.

Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)

(c) Connect the connectors to the spiral cable sub-assembly.

9. INSTALL STEERING PAD

HINT
Refer to the instructions for Installation of the steering pad Installation.

10. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
* Connect the cable to the negative (-) battery terminal with the front wheels facing straight ahead.
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
12. INSPECT STEERING PAD Installation

13. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.