B1610

DTC B1610/13 Front Airbag Sensor RH Circuit Malfunction

DESCRIPTION

DTC Detecting Condition:

The front airbag sensor RH consists of part including the diagnostic circuit and the frontal deceleration sensor.

When the center airbag sensor assembly receives signals from the frontal deceleration sensor it determines whether or not the SRS should be activated.

DTC B1610/13 is set when a malfunction is detected in the front airbag sensor RH circuit.

Wiring Diagram:

INSPECTION PROCEDURE

NOTE: In order to prevent unexpected airbag deployment, disconnect the following connectors before inspecting parts such as wire harnesses, if the application of tester probes to the center airbag sensor assembly connector is necessary.

1. Turn the ignition switch to the lock position.
2. Disconnect the negative (-) terminal cable from the battery and wait for at least 90 seconds.
3. Disconnect the connector from the center airbag sensor assembly.
4. Disconnect the connectors from the steering pad.
5. Disconnect the connectors from the front passenger airbag assembly.
6. Disconnect the connector from the front seat outer belt assembly LH.
7. Disconnect the connector from the front seat outer belt assembly RH.

HINT: Skip the following steps if side and curtain shield airbags are not fitted.

8. Disconnect the connector from the front seat side airbag assembly LH.
9. Disconnect the connector from the front seat side airbag assembly RH.
1O. Disconnect the connector from the curtain shield airbag assembly LH.
11. Disconnect the connector from the curtain shield airbag assembly RH.

Step 1-2:

Step 3-4:

Step 5-6:

Step 7:

Step 8:

Step 9:

Step 10:

Step 11: